thesis < Overseas Thesis SCI

국외 논문 SCI : Overseas Thesis SCI

2017

①" Optimum Design of ALA-SynRM for Direct Drive Electric Valve Actuator" IEEE Transactions on Magnetics v.53, no. 4, 2017


②" Comparison characteristics of various SynRMs through FEM and experimental verification" Physica B, 2017


2012

①"Optimum Shape Design Solution of Flux Switching Motor Using Response Surface Methodology and New Type Winding ", IEEE Transactions on Magnetics, v.48, no.4, pp1637-1640, 2012.04.


②"Optimum Design Criteria for Maximum Torque and Efficiency of a Line-Start Permanent-Magnet Motor Using Response Surface Methodology and Finite Element Method ", IEEE Transactions on Magnetics, v.48, no.2, pp863-866, 2012.02.


2011

①"Optimum Shape Design of Single-Sided Linear Induction Motors Using Response Surface Methodology and Finite-Element Method ", IEEE Transactions on Magnetics, v.47 no.10, pp3657-3660, 2011.10.


2010

①"Efficiency Evaluations of Synchronous Reluctance Motor Using Coupled FEM & Preisach Modelling", IEEE Transaction on Magnetics, v.39 no.5, pp.3271-3273, 2003.09.


2009

①"Characteristics Analysis and Optimum Design of Anisotropy Rotor SynRM Using Coupled Finite Element Method and Response Surface Methodology ", IEEE Transactions on Magnetics, v.45 no.10, pp.4696-4699, 2009.10.


②"Optimum Design Criteria for Maximum Torque Density and Minimum Torque Ripple of SynRM according to the Rated Wattage using Response Surface Methodology", IEEE Transactions on Magnetics, v.45 no.3, pp.1578-1581, 2009.03.


2008

①"Study on high-Efficiency Performance in Interior Permanent-Magnet Synchronous Motor With Double-Layer PM Design", IEEE Transactions on Magnetics, v.44 no.11, pp.4393-4396, 2008.11.


②"Optimum Design of Synchronous Reluctance Motors Based on Torque/Volume Using Finite Element Method and Sequential Unconstrained Minimization Technique", IEEE Transactions on Magnetics, v.44 no.11, pp.4143-4146, 2008.11.


③"The Evaluation of On-line Observer System of Synchronous Reluctance Motor Using a Coupled Transient FEM & Preisach Model", IEEE Transactions on Magnetics, v.44 no.11, pp.4139-4142, 2008.11.


④"Optimum Design Criteria for Maximum Torque Density and Minimum Torque Ripple of SynRM according to the Rated Wattage using Response Surface Methodology", IEEE Transactions on Magnetics, v.44 no.11, pp.4135-4138, 2008.11.


⑤"Determination of Paramenters of Motor Simulation Module Employed in ADVISOR", IEEE Transactions on Magnetics, v.44 no.6, pp.1578-1581, 2008.06.


⑥"Permanent Magnet Demagnetization Characteristic Analysis of a Variable Flux Memory Motor Using Coupled Preisach Modeling and FEM", IEEE Transactions on Magnetics, v.44 no.6, pp.1550-1553, 2008.06.


⑦"The Torque Ripple Reduction of A Concentrated winding SynRM according to A Stator &rotor structure variations using RSM", Journal of Applied Physics,


2006

①"Rotor Design on Torque Ripple Reduction for a Synchronous Reluctance Motor with Concentrated Winding using Response Surface Methodology", IEEE Transactions on Magnetics, v.42 no.10, pp.3479-3481, 2006.10.


②"Optimum design criteria for a synchronous reluctance motor with concentrated winding using response surface methodology", Journal of Applied Physics, v.99 no.8, pp.08R325-08R325-3, 2006.05.



2005

①"Optimum design criteria Based on the Rated Watt of a Synchronous Reluctance Motor Using a Coupled FEM and SUMT", IEEE Transactions on Magnetics, v.41 no.10, pp.3970-3972, 2005.10.


②"Characteristic Analysis of Permanent Magnet-assisted Synchronous Reluctance Motor for High Power Application", Journal of Applied Physics(MMM), v.97 no.10, pp.10Q503-10Q503-3, 2005.10.



2003

①"A Study on Hysteresis Analysis of Line Start Permanent Magnet Motor Using Preisach Modelling", IEEE Transaction on Magnetics, v.39 no.5, pp.2543-2545, 2003.09.



2002

①"Design Solutions to Minimize Iron Core Loss in Synchronous Reluctance Motor Using Preisach Model and FEM", IEEE Transaction on Magnetics, v.34 no.5, pp.3276-3278, 2002.09.



1999

①"Hysteresis Analysis for the Permanent Magnet Assisted Synchronous Reluctance Motor by Coupled FEM & Preisach Modelling", IEEE Transaction on Magnetics, v.35 no.3, pp.1202-1206, 1998.05.


②"Effect of Magnet on Ld and Lq Inductance of Permanent Magnet Assisted Sychronous Reluctance Motor Using Finite Element Method", IEEE Transaction on Magnetics, v.35 no.3, pp.1199-1202, 1998.05.



1998

①"Vector Control Scheme of Synchronous Reluctance Motor Considering Iron Core Loss", IEEE Transaction on Magnetics, v.34 no.5, pp.3522-3527, 1998.09.


②"Dynamic Characteristic Analysis of Synchronous Reluctance Motor Considering Saturation and Iron Loss by FEM", IEEE Transaction on Magnetics, v.34 no.5, pp.2629-2632, 1998.09.



1995

①"Iron Loss Calculation in an Amorphous Transformer", Advanced Computational And Design Technique In Applied Electro-Magnetic Systems, v.6, 1995.04.