2018

2018 China Hangzhou

(1) "Study on Rotor shape for High Torque characteristics of ALA-SynRM" HMM 2017, 29-31 May

(2) "Study on Demagnetization Analysis of IPMSM for Electric Railway Vehicle Considering the Thermal and Operation Conditions" HMM 2017, 29-31 May

2017

2017 Spain Barcelona

(1) "Optimal Design of Spoke Type Motor and Magnetizer using FEM and RSM" HMM 2017, 29-31 May

(2) "Optimum Design of Interior Permanent Magnet Synchronous Motor for Electric Railway Vehicle considering thermal demagnetization characteristic due to Temperature rise" HMM 2017, 29-31 May

(3) "Comparison characteristics of various SynRMs through FEM and Experiment" HMM 2017, 29-31 May

2017 Korea Daejeon

(1) "Characteristic Comparison of Various SynRMs According to the Geometric Structure By Experimental Verification" COMPUMAG 2017, 18-22 June

2017 France Mont-Blanc

(1) "A study on the Shape Design Considering the Centrifugal Force of Spoke Type Motor" ISEM 2017, 3-6 September

(2) "Comparison of MAGLEV LIM according to the Control Method" ISEM 2017, 3-6 September

(3) "Optumum Design of Interior Permanent Mgnet Sychronous Motor for Efficiency Improvement of Electric Railway Vehicle" ISEM 2017, 3-6 September

(4) “Comparison of the Characteristics of four types of SynRMs through Experiments” ISEM 2017, 3-6 September

2017 Spain Sevilla

(1) “A Study on shape Optimization of Magnet and using magnet wedge for Torque Characteristic Improvement of 210kW Class IPMSM” SMM 2017, 10-13 September 2017

(2) “Optimum Design of PMA-SynRM for Minimum Inductance of Q-axis and Experimental Verification” SMM 2017, 10-13, September 2017

2017 USA Pittsburgh

(1) “Analysis of Magnetization Characteristic Based B-H curve fitting according to the Thermal and Operation Conditions” MMM 2017, November 6-10, 2017,

(2) “Design of Spoke Type Motor and Magnetizer for Improving Efficiency Based Rare-Earth-Free Permanent-Magnet Motor” MMM 2017, November 6-10, 2017

2016 France Lyon

(1) "Optimum Design and Characteristic Analysis on Interior Permanent Magnet Synchronous Motor for Railway Vehicle" EMF 2016, 12-14 April 2016

(2) "Optimum Design of PMA-SynRM according to the Rated Wattages for Power Improvement" EMF 2016, 12-14 April 2016

(3) "A Study of Magnetization Phenomenon for VFMM using FEM and Experimental Verification" EMF 2016, 12-14 April 2016

2016 Italy Torino

(1) "Optimum Design of Interior Permanent Magnet Synchronous Motor for Torque Density and Torque Ripple Improvement of Electric Railway Vehicle" EMSA 2016, 12-15 July 2016

(2) "Optimum Design of ALA-SynRM for Direct Drive Electric Valve Actuator" EMSA 2016, 12-15 July 2016

(3) "A Study on Vector Control for Driving Efficiency Improvement of MAGLEV LIM base on Complex Number Approximation Theory" EMSA 2016, 12-15 July 2016

(4) "A Study of Flux Control for High-Efficiency Speed Control of Variable Flux Permanent Magnet Motor" EMSA 2016, 12-15 July 2016

2016 Italy Rome

(1) "Study of Magnetization Phenomenon for VFMM using FEM and Experimental Verification" OIPE 2016, 13-15 September 2016

(2) "Calculation on Proportion of Rotor Shape for Torque Ripple Reduction of Axially Laminated Type Synchronous Reluctance Motor" OIPE 2016, 13-15 September 2016

(3) "Optimum Design of Interior Permanent Magnet Synchronous Motor for Torque Density and Torque Ripple Improvement of Electric Railway Vehicle" OIPE 2016, 13-15 September 2016

(4) "Studies of Holding Torque Output according to the Change of Energy Device in Induction Motor for Electornic Vehicle" OIPE 2016, 13-15 September 2016

(5) " Optimum Design of SPOKE Type Motor and Magnetizer using FEM and RSM" OIPE 2016, 13-15 September 2016

2016 USA Miami

(1) "Computation on Ratio of Rotor Core and Flux Barrier for Torque Ripple Reduction of 240W ALA-SynRM" CEFC 2016, 13-16 November 2016

(2) "Optimum Design and Calculation of d-q Axis Currents for 50kW EV Traction Motor based on Flux-Torque Controller" CEFC 2016, 13-16 November 2016

2015 China, Beijing

(1)"Optimum Design of Axially Laminated Synchronous Reluctance Motor, Considering Centrifugal Force and Magnetic Saturation using FEM and RSM" Intermag 2015, 11-15 May 2015.

(2)"Optimum Design of PMA-SynRM for Zero Inductance of Q-axis and Experimental Verification" Intermag 2015, 11-15 May 2015.

(3)"Analysis on Variable SynRM according to Geometric Structure by Numerical Analysis and Experimentation" Intermag 2015, 11-15 May 2015.

(4)"Study of Variable Flux Memory Motor Using Magnetic Equivalent Circuit Modeling and Finite Element Method" Intermag 2015, 11-15 May 2015.

(5)"Characteristic Analysis of Spoke Type Interior Permanent Motor for Minimum Cogging Torque and Torque Ripple" Intermag 2015, 11-15 May 2015.

(6)"Comparison of Pole Changing Memory Motor using Preisach Models and Experimental Verification" Intermag 2015, 11-15 May 2015.

(7)"Coupled Analysis of Spoke Type Motor and Magnetizer System using FEM and RSM" Intermag 2015, 11-15 May 2015.

2015 Canada, Montreal

(1)"Optimum Shape Design of Spoke Type Motor and Magnetizer using Finite Element Method and Response Surface Method" 2015 Compumag Conference, June 28- July 2 2015.

(2)"Design Method of Improverd Pole Changing Memory Motor using Finite Element Method and Response Surface Method" 2015 Compumag Conference, June 28- July 2 2015.

(3)"Optimum Design Criteria of Variable Flux Memory Motor Using Magnetic Equivalent Circuit Modeling and Response Surface Methodology" 2015 Compumag Conference, June 28- July 2 2015.

(4)"Optimum Design of Spoke Type Interior Permanent Magnet Motor for Reducing Cogging Torque and Torque Ripple" 2015 Compumag Conference, June 28- July 2 2015.

(5)"Comparative Analysis for four type SynRMs according to Geometric Structure using Preisach Models and Experimental Verification" 2015 Compumag Conference, June 28- July 2 2015.

2015 Japan, Kobe

(1)"Optimum Design of Axially Laminated Synchronous Reluctance Motor, Considering Centrifugal Force and Magnetic Saturation using FEM and RSM" ISEM 2015, 15-18 September 2015.

(2)""Comparative Analysis for four type SynRMs according to Geometric Structure using Preisach Models and Experimental Verification" ISEM 2015, 15-18 September 2015.

(3)"Design Method of Improved Pole Changing Memory Motor using Finite Element Method and Response Surface Method" ISEM 2015, 15-18 September 2015.

(4)"Optimum Design of PMA-SynRM for Zero Inductance of Q-axis and Experimental Verification" ISEM 2015, 15-18 September 2015.

(5)"Optimum Shape Design of Spoke Type Motor and Magnetizer using Finite Element Method and Response Surface Method" ISEM 2015, 15-18 September 2015.

(6)"Optimum Design Criteria of Variable Flux Memory Mothor Using Magnetic Equivalent Circuit Modeling and Response Surface Methodology" ISEM 2015, 15-18 September 2015.

(7)"Optimum Shape Design of Spoke Type Motor and Magnetizer using Finite Element Method and Response Surface Method" ISEM 2015, 15-18 September 2015.

2015 Brazil, Sao Paulo

(1)"Design Method of Improved Pole Changing Memory Motor using Finite Element Method and Response Surface Method" SMM 22, 13-16 September 2015.

(2)"Optimum Design of PMA-SynRM for Zero Inductance of Q-axis and Experimental Verification" SMM 22, 13-16 September 2015.

(3)"Optimum Shape Design of Spoke Type Motor and Magnetizer using Finite Element Method and Response Surface Method" SMM 22, 13-16 September 2015.

(4)"Optimum Design Criteria of Variable Flux Memory Motor Using Magnetic Equivalent Circuit Modeling and Response Surface Methodology" SMM 22, 13-16 September 2015.

2014 Austria, Vienna

(1)"PM Magnetization Characteristics Analysis Considered Rotor Bar Eddy Current of a Post-Assembly Line Start PM Motor using Coupled Preisach Modeling and FEM", EMSA 2014, 6-9 July 2014.

(2)"Demagnetization Current Evaluations Using Finite Element Method and Magnetic Equivalent Circuit Modeling in a Pole Changing Memory Motor", EMSA 2014, 6-9 July 2014.

(3)"Optimum Design of ALA-SynRM Considering Centrifugal Force and Flux Effect for Torque Density and Power Factor Improvement", EMSA 2014, 6-9 July 2014.

(4)"Optimum Design Standard Evaluation and Experiment of PMASynRM for Power Improvement", EMSA 2014, 6-9 July 2014.

(5)"Loss and Efficiency Comparisons of Various SynRMs according to Geometric Structure by Preisach Models and Experimental Verification ", EMSA 2014, 6-9 July 2014.

(6)"Prediction of conductor ratio according to each of output power of Tubular Linear Induction Motor using FEM and RSM", EMSA 2014, 6-9 July 2014.

2014 UK, London

(1)"Optimum design of ALA-SynRM for torque density and ripple improvement", CEM 2014, 31 March - 1 April 2014.

(2)"Loss and Efficiency Comparisons of Four Type SynRMs Using Preisach Models and Experimental Verification", CEM 2014, 31 March - 1 April 2014.

(3)"Optimum Design Criteria for premium performance of Traction Induction Motor", CEM 2014, 31 March - 1 April 2014.

(4)"On-line Observer design for Sensorless Vector Control of LIM Servo System ", CEM 2014, 31 March - 1 April 2014.

2014 Netherlands, Delft

(1)"Demagnetization Current Evaluations Using Finite Element Method and Magnetic Equivalent Circuit Modeling and Optimum Design in a Pole Changing Memory Motor", OIPE 2014, 10-12 September 2014.

(2)"Optimum Design Criteria of Variable Flux Memory Motor Using Magnetic Equivalent Circuit Modeling and Response Surface Methodology", OIPE 2014, 10-12 September 2014.

(3)"Comparative Analysis on Variable SynRM According to Geometric Structure by Numerical Analysis and Experimentation", OIPE 2014, 10-12 September 2014.

(4)"Optimum Design Criteria of ALA Rotor Synchronous Reluctance Motor for The Maximum Torque Density and Power Factor Improvement", OIPE 2014, 10-12 September 2014.

(5)"Optimum Design of PMA-SynRM According to The Rated Wattage for Power Improvement", OIPE 2014, 10-12 September 2014.

2013 Macedonia, Ohrid

(1)"Demagnetization Current Evaluations Using Finite Element Method & Magnetic Equivalent Circuit modeling and Optimum Design in a Pole Changing Memory Motor", ISEF 2013, 12-14 September 2013.

(2)"Loss & Efficiency Comparisons of PMA-, CW-, Normal SynRMs by Coupled Preisach Models & FEM and Experiment", ISEF 2013, 12-14 September 2013.

(3)"Characteristics Analysis & Optimum Design of Axially Lamianated Anisotropic Rotor Synchronous Reluctance Motor Using Coupled Finite Element Method & Response Surface Methodology", ISEF 2013, 12-14 September 2013.

(4)"PM Magnetization Characteristics Analysis of a Post-Assembly Line Start Permanent Magnet Motor Using Coupled Preisach Modeling and Finite Element Method", ISEF 2013, 12-14 September 2013.

(5)"Characteristic Analysis & Optimum Design Standard Evaluation of Permanent Magnet Assisted Synchronous Reluctance Motor for Power Improvement", ISEF 2013, 12-14 September 2013.

(6)"The Evaluation of On-line Observer System of Linear Induction Motor Using a Transient FEM & Experiment", ISEF 2013, 12-14 September 2013.

2013 Hungary, Budapest

(1)"Design of On-Line Observer of Lim Servo System using a Tranient FEM & Experiment for Sensorless Vector Control", SMM21 Conference, 1-4 September 2013.

(2)"Characteristics Analysis & Optimum Design of Axially Laminated Anisotropic Rotor SynRM using Coupled FEM & RSM", SMM21 Conference, 1-4 September 2013.

(3)"Loss & Efficiency Comparisons Of Pma-, Cw-, Normal Synrms By Coupled Preisach Models & Fem And Experiment", SMM21 Conference, 1-4 September 2013.

(4)"PM Magnetization Characteristics Analysis of a Post-Asembly Line Start Permanent Magnet Motor using Coupled Preisach Modeling and FEM", SMM21 Conference, 1-4 September 2013.

(5)"Optimum Driving Conditions Design Of Moving Secondary Plate Type Conveyor System", SMM21 Conference, 1-4 September 2013.

(6)"Prediction of Conductor Ratio for Tubular Linear Induction Motor using Finite Element Method and Response Surface Methodology", SMM21 Conference, 1-4 September 2013.

(7)"Demagnetization Current Evaluations using Finite Element Method and Magnetic Equivalent Circuit Modeling in a Pole Changing Memory Motor", SMM21 Conference, 1-4 September 2013.

(8)"Optimum Design Criteria based on the Rated Wattage of Permanent Magnet Assisted Synchronous Reluctance Motor", SMM21 Conference, 1-4 September 2013.

(9)"Optimum Design Criteria of Train Traction Induction Motor using Response Surface Methodology & FEM for Premium Performance", SMM21 Conference, 1-4 September 2013.

2013 Canada, Quebec

(1)"Demagnetization Current Evaluations Using Finite Element Method and Magnetic Equivalent Circuit modelling in a Pole Changing Memory Motor", ISEM2013, 31 July-2 August 2013.

(2)"Loss & Efficiency Comparisons of PMA-, CW-, Normal SynRMs by Coupled Preisach Models & FEM and Experiment", ISEM2013, 31 July-2 August 2013.

(3)"Characteristics Analysis & Optimum Design of Axially lamianated anisotropic Rotor SynRM Using Coupled FEM & RSM", ISEM2013, 31 July-2 August 2013.

(4)"Design of On-line Observer of LIM Servo System using a Transient FEM & Experiment for Sensorless Vector Control", ISEM2013, 31 July-2 August 2013.

(5)"Optimum Design Criteria Based on the rated Wattage of Permanent Magnet Assisted Synchronous Reluctance Motor", ISEM2013, 31 July-2 August 2013.

(6)"Optimum Design Criteria of Train Traction Induction Motor Using Response Surface Methodology & FEM for Premium Performance", ISEM2013, 31 July-2 August 2013.

(7)"Prediction of conductor ratio for Tubular Linear Induction Motor using Finite Element Method and Response Surface Methodology", ISEM2013, 31 July-2 August 2013.

(8)"PM Magnetization Characteristics Analysis of a Post-Assembly Line Start Permanent Magnet Motor Using Coupled Preisach Modeling and FEM", ISEM2013, 31 July-2 August 2013.

2013 Hungary, Budapest

(1)"PM Magnetization Characteristics Analysis of a Post-Assembly Line Start Permanent Magnet Motor Using Coupled Preisach Modeling and Finite Element Method", 2013 Compumag Conference, 30 June-4 July 2013.

(2)"Loss & Efficiency Comparisons of PMA-, CW-, Normal SynRMs by Coupled Preisach Models & FEM and Experiment", 2013 Compumag Conference, 30 June-4 July 2013.

(3)"Optimum LIM Interval Selection of Vector Controlled Moving Secondary Plate Conveyor System Using FEM & SUMT for Constant Speed Control", 2013 Compumag Conference, 30 June-4 July 2013.

(4)"Characteristics Analysis & Optimum Design of Axially Lamianated Anisotropic Rotor Synchronous Reluctance Motor Using Coupled Finite Element Method & Response Surface Methodology", 2013 Compumag Conference, 30 June-4 July 2013.

(5)"Characteristic Analysis & Optimum Design Standard Evaluation of Permanent Magnet Assisted Synchronous Reluctance Motor for Power Improvement", 2013 Compumag Conference, 30 June-4 July 2013.

2013 Italy, Taormina

(1)"Optimum design of CW-SynRM and loss & efficiency evaluations by coupled preisach models & FEM and experiment", 9th International Symposium on Hysteresis Modelling and Micromagnetics (HMM 2013), 13-15 May 2013.

(2)"Demagnetization current evaluations using Finite Element Method & magnetic equivalent circuit modeling and optimum design in a pole changing memory motor", 9th International Symposium on Hysteresis Modelling and Micromagnetics (HMM 2013), 13-15 May 2013.

2013 USA, Chicago

(3)"Optimum Design of CW-SynRM and Loss and Efficiency Evaluations by Coupled Preisach Models & FEM and Experiment", 12th Joint MMM-Intermag Conference, January 14-18 2013.

(4)"Demagnetization Current Evaluations Using Finite Element Method and Magnetic Equivalent Circuit Modeling in a Pole Changing Memory Motor", 12th Joint MMM-Intermag Conference, January 14-18 2013.

(5)"Loss and Efficiency Comparisons of PMA-, CW-, Normal SynRMs by Coupled Preisach Models and FEM and Experiment", 12th Joint MMM-Intermag Conference, January 14-18 2013.

2012 USA, North Carolina Raleigh

(1)" Loss & Efficiency Evaluations of SynRM According to Windings Type by Coupled Preisach Models & FEM and Experiment", IEEE ENERGY CONVERSION CONGRESS & EXPOSITION (ECCE 2012), 15-20 September, 2012.

2012 Belgium, Ghent

(2)" Demagnetization Current Evaluations and Optimum Design using Finite Element Method and Magnetic Equivalent Circuit Modeling in a Pole Changing Memory Motor", International Workshop on Optimization and Inverse Problems in Electromagnetism (OIPE 2012), 19-21 September, 2012.

(3)" Optimum Design Criteria of 250 kW Induction Motor using Response Surface Methodology & FEM for Premium Efficiency", International Workshop on Optimization and Inverse Problems in Electromagnetism (OIPE 2012), 19-21 September, 2012.

(4)" Optimum Design of CW-SYNRM and Loss & Efficiency Evaluations by Coupled Preisach Models & FEM and Experiment", International Workshop on Optimization and Inverse Problems in Electromagnetism (OIPE 2012), 19-21 September, 2012.

(5)" Prediction of Conductor Ratio for Tubular Linear Induction Motor using Finite Element Method and Response Surface Methodology", International Workshop on Optimization and Inverse Problems in Electromagnetism (OIPE 2012), 19-21 September, 2012.

(6)" Characteristic Analysis & Optimum Design Criteria of Permanent Magnet Assisted Synchronous Reluctance Motor for High Power Performance", International Workshop on Optimization and Inverse Problems in Electromagnetism (OIPE 2012), 19-21 September, 2012.

2012 Canada, Vancouver

(1)" The Evaluation of On-line Observer of LIM Servo System Using a Transient FEM & Experiment", 2012 IEEE International Magnetics Conference(INTERMAG 2012), 7-11 May, 2012.

(2)" Optimum Design of CW-SynRM and Loss & Efficiency Evaluations by Coupled Preisach Models & FEM and Experiment", 2012 IEEE International Magnetics Conference(INTERMAG 2012), 7-11 May, 2012.

2011 USA, Scottsdale, Arizona

(1)" Characteristic Analysis & Optimum Design of Permanent Magnet Assisted Synchronous Reluctance Motors for Power Improvement", 56th Annual Conference on Magnetism and Magnetic Materials(MMM 2011), October 30 - November 3, 2011.

2011 Korea, Daejoen

(1)" Optimum LIM Interval Selections of 3D Conveyor System for Control Algorithm Developments", The 21st International Conference on Magnetically Levitated Systems and Linear Drives (MAGLEV 2011), 10-13 October 2011.

(2)" Optimum Shape Design of Single-Sided Linear Induction Motors Using Response Surface Methodology and Finite Element Method", The 21st International Conference on Magnetically Levitated Systems and Linear Drives (MAGLEV 2011), 10-13 October 2011.

2011 Greece, Kos island

(1)" Optimum Design of 250 kW Traction Induction Motor Using Response Surface Methodology & FEM for Premium Efficiency", 2011 SMM Conference, 18-22 September 2011.

(2)" Optimum LIM Interval Selection of Vector Controlled Moving Secondary Plate Conveyor System Using FEM for Constant Speed Control", 2011 SMM Conference, 18-22 September 2011.

(3)" Optimum Shape Design Solution of Flux Switching Motor using Response Surface Methodology and New Type Winding", 2011 SMM Conference, 18-22 September 2011.

(4)" Optimum Design Criteria for Efficiency Improvement of a Line-Start Permanent-Magnet Motor using Response Surface Methodology and Finite Element Method", 2011 SMM Conference, 18-22 September 2011.

(5)" Magnetic Equivalent Circuit Modeling and PM Performance Evaluations of a Pole Changing Memory Motor Using Coupled FEM & Preisach modeling", 2011 SMM Conference, 18-22 September 2011.

(6)" Characteristic Analysis & Optimum Design of PM Assisted SynRM for Power Improvement using RSM and FEM", 2011 SMM Conference,18-22 September 2011.

(7)" Loss & Torque Evaluations and Stator Design of SynRM According to Windings Type by Coupled Preisach Models & FEM and Experiment", 2011 SMM Conference, 18-22 September 2011.

(8)" The Evaluation of On-line Observer System of Linear Induction Motor Using a Transient FEM & Experiment for Sensorless Vector Control", 2011 SMM Conference, 18-22 September 2011.

(9)" Optimal Design of Tubular Linear Induction Motor for Maximum Power Density using Finite Element Method", 2011 SMM Conference, 18-22 September 2011.

2011 China, Beijing

(1)" Optimum Shape Design of Single-sided Linear Induction Motor Using Response Surface Method and Finite Element Method", 2011 ICEMS Conference, 20-23 August 2011.

(2)" Optimum Design Criteria for Maximum Torque Density & Minimum Current Density of a Line-Start Permanent-Magnet Motor using Response Surface Methodology & Finite Element Method", 2011 ICEMS Conference, 20-23 August 2011.

2011 Australia, Sydney

(1)" Optimum LIM Interval Selection of Vector Controlled Moving Secondary Plate Conveyor System Using FEM & SUMT for Constant Speed Control", 2011 Compumag Conference, 12-15 July 2011.

(2)" Optimum design criteria for maximum torque density & minimum torque ripple of flux switching motor using response surface methodology", 2011 Compumag Conference, 12-15 July 2011.

(3)" Magnetization Characteristics Analysis in a Pole Changing Memory Motor using FEM & Preisach modeling", 2011 Compumag Conference, 12-15 July 2011.

(4)" Optimum Design Criteria of 250 kW Premium Efficiency Traction Induction Motor Using RSM & FEM", 2011 Compumag Conference, 12-15 July 2011.

(5)" PM Magnetization Characteristics Analysis of a Post-Assembly Line Start Permanent Magnet Motor Using Coupled Preisach Modeling and FEM", 2011 Compumag Conference, 12-15 July 2011.

(6)" Prediction of conductor ratio for Tubular Linear Induction Motor using Finite Element Method and Response Surface Methodology", 2011 Compumag Conference, 12-15 July 2011.

(7)" A Novel Stator Design of Synchronous Reluctance Motor by Loss & Torque Evaluations Related to Slot Numbers using Coupled Preisach Model & FEM", 2011 Compumag Conference, 12-15 July 2011.

(8)" Optimum Design Criteria for Maximum Torque Density & Efficiency of a Line-Start Permanent-Magnet Motor using Response Surface Methodology & Finite Element Method", 2011 Compumag Conference, 12-15 July 2011.

2011 Taiwan, Taipei

(1)" A Novel Stator Design of Synchronous Reluctance Motor by Loss & Torque Evaluations Related to Slot Numbers using Coupled Preisach Model & FEM", 2011 Intermag Conference, 25-29 April 2011.

(2);" Optimum Design Criteria for Maximum Torque Density & Efficiency of a Line-Start Permanent-Magnet Motor using Response Surface Methodology & Finite Element Method.", 2011 Intermag Conference, 25-29 April 2011.

(3)" PM Magnetization Characteristics Analysis of a Post-Assembly Line Start Permanent Magnet Motor Using Coupled Preisach Modeling and FEM.", 2011 Intermag Conference, 25-29 April 2011.

(4)" Characteristic Analysis & Optimum Design of Permanent Magnet Assisted Synchronous Reluctance Motor for Premium Efficiency Performance", 2011 Intermag Conference, 25-29 April 2011.

(5)" Optimum Shape Design of Single-sided Linear Induction Motor Using Response Surface Method and Finite Element Method", 2011 Intermag Conference, Taipei, Taiwan, 25-29 April 2011.

2010 USA, Washington DC

(1)"Loss Analysis and Efficiency Evaluations of Synchronous Reluctance Motor Using Coupled FEM & Preisach Modelling", 11th Joint MMM-Intermag Conference, January 18-22 2010.

(2)"Optimum Design Criteria for Maximum Torque Density & Minimum Torque Ripple of Flux Switching Motor using Response Surface Methodology", 11th Joint MMM-Intermag Conference, January 18-22 2010.

(3)"Efficiency Evaluation of PMASynRM Vs. SynRM Using Coupling FEM & Preisach Modeling", 11th Joint MMM-Intermag Conference, January 18-22 2010.

(4)"Optimum Design For Premium Efficiency of 250kW Traction Induction Motor Using Response Surface Methodology & Analysis of Steady State Operation of an Induction Generator", 11th Joint MMM-Intermag Conference, January 18-22 2010.

2010 USA,Chicago

(1)"Optimum Design Criteria for Maximum Torque Density & Minimum Torque Ripple of Flux Switching Motor using Response Surface Methodology", The 14th Biennial IEEE Conference on Electromagnetic Field Computation, May 9-12 2010.

(2)"Charaterisrics Analysis in a Pole Chang Memory Motor Using Coupled FEM & Preisach Modeling", The 14th Biennial IEEE Conference on Electromagnetic Field Computation, May 9-12 2010.

(3)"Efficiency Evaluation of PMASynRM vs. SynRM Using Coupling FEM & Preisach Modeling", The 14th Biennial IEEE Conference on Electromagnetic Field Computation, May 9-12 2010.

(4)"Optimum Design Criteria of Miniature Type Linear Servo Motor of Precise Pick & Place Module for Cogging Force Reduction Using Response Surface Methodology & Finite Element Method ", The 14th Biennial IEEE Conference on Electromagnetic Field Computation, May 9-12 2010.

(5)"Characteristic Analysis & Optimum Design of Permanent Magnet Assisted Synchronous Reluctance Motor for Premimum Efficiency Performance", The 14th Biennial IEEE Conference on Electromagnetic Field Computation, May 9-12 2010.

(6)"Optimum Design for Premimum 250kW Efficiency of Traction Induction Motor Using Response Surface Methodology & FEM", The 14th Biennial IEEE Conference on Electromagnetic Field Computation, May 9-12 2010.

(7)"Optimum Design Criteria for Maximum Torque Density & Minimum Torque Ripple of Flux Switching Motor using Respon Surface Methodology", The 14th Biennial IEEE Conference on Electromagnetic Field Computation, May 9-12 2010.

(8)"Efficiency Evaluation of PMASynRM vs. SynRM Using Coupled FEM & Preisach Modeling", The 14th Biennial IEEE Conference on Electromagnetic Field Computation, May 9-12 2010.

(9)"A Novel Stator Design of Synchronous Reluctance Motor by Loss & Torque Evaluations Related to Slot Numbers using Coupled Preisach Model & FEM", The 14th Biennial IEEE Conference on Electromagnetic Field Computation, May 9-12 2010.

(10)"Loss Analysis and Efficiency Evaluations of Synchronous Reluctance Motor Using Coupled Finite Element Method & Preisach Modelingr", The 14th Biennial IEEE Conference on Electromagnetic Field Computation, May 9-12 2010.

(11)"Optimum LIM Interval Selection of Vector Controlled Moving Secondary Plate Type Conveyor System Using FEM", The 14th Biennial IEEE Conference on Electromagnetic Field Computation, May 9-12 2010.

(12)"Characteristics Analysis in a pole Changing Memory Using Coupled FEM & Preisach modeling", The 14th Biennial IEEE Conference on Electromagnetic Field Computation, May 9-12 2010.

2009 Brazil Florianopolis

(1)"A Development on the Analysis Method of Synchronous Reluctance Motor Using FEM Coupled Electomagnetic Field of Thermal Field", 17th Conference on the Computation of Electromagnetic Fields (COMPUMAG), November 22-26 2009.

(2)"Characteristics Analysis & Optimum Design of Anisotropy Rotor SynRM Using Coupled", 17th Conference on the Computation of Electromagnetic Fields (COMPUMAG), November 22-26 2009.

(3)"Optimum LIM Interval Selection of Vector Controlled Moving Secondary Plate Conveyor System Using FEM & SUMT", 17th Conference on the Computation of Electromagnetic Fields (COMPUMAG), November 22-26 2009.

(4)"Dynamic Characteristics Analysis in A Pole Changing Memory Motor Using Coupled FEM & Preisach Modeling", 17th Conference on the Computation of Electromagnetic Fields (COMPUMAG), , November 22-26 2009.

(5)"Characteristic Analysis & Optimum Design of Permanent Magnet Assisted Synchronous Reluctance Motor for Premium Effciency Performance", 17th Conference on the Computation of Electromagnetic Fields (COMPUMAG), November 22-26 2009.

(6)"Loss Analysis and Effciency Evaluations of Synchronous Reluctance Motor Using Coupled FEM & Preisach Modelling", 17th Conference on the Computation of Electromagnetic Fields (COMPUMAG), November 22-26 2009.

(7)"Effciency Evaluation of PMASynRM Vs. SynRM Using Coupling FEM & Preisach Modeling"', 17th Conference on the Computation of Electromagnetic Fields (COMPUMAG), November 22-26 2009.

2009 Korea Incheon

(1)"Dynamic Characteristic Analysis of LIM Using Coupled FEM and Control Algorithm", The 7th International Symposium on Linear Drives for Industry Applications, September 20-23,2009.

(2)"Dynamic Characteristics Analysis of 3D Conveyer System Linear Induction Motor for Control Algorithm Developments" , The 7th International Symposium on Linear Drives for Industry Applications, September 20-23, 2009.

2009 USA California Sacrmento

(1)"Heat characteristics analysis of synchronous reluctance motor using FEM coupled electromagnetic field and thermal field", The 2009 International Magnetics(Intermag) Conference May4-8 2009.

(2)"Characteristics analysis & optimum design of anisotropy rotor SynRM using coupled FEM & RSM", The 2009 International Magnetics(Intermag) Conference, May4-8 2009.

2008 Greece Athens

(1)"Optimum Design Criteria For Maximum Torque Density & Minimum Torque Ripple of SynRM According to the Rated Wattage Using RSM", The Thirteen Biennial IEEE Conference on Electromagnetic Field Computation (CEFC), May 11-15 2008.

(2)"A Study on the Brushless DC Motor Using a Sine Wave Driving System and a Position Sensor", The Thirteen Biennial IEEE Conference on Electromagnetic Field Computation (CEFC), May 11-15 2008.

(3)"The Evaluation of On-Line Observer System of Synchronous Reluctance Motor Using a Coupled Transient FEM & Preisach Model", The Thirteen Biennial IEEE Conference on Electromagnetic Field Computation (CEFC), May 11-15 2008.

(4)"Characteristics Analysis of Anisotropy Rotor SynRM Using a Coupled FEM & Preisach Model", The Thirteen Biennial IEEE Conference on Electromagnetic Field Computation (CEFC), May 11-15 2008.

(5)"Optimum Design of Synchronous Reluctance Motor Based on Torque/Volume Using FEM & SUMT", The Thirteen Biennial IEEE Conference on Electromagnetic Field Computation (CEFC), May 11-15 2008.

2008 Spain Madrid

(1)"Study on high-Efficiency Performance in Interior Permanent-Magnet Synchronous Motor With Double-Layer PM Design", The 2008 International Magnetics (INTERMAG) Conference, May 4-8 2008.

(2)"Optimum Design of Synchronous Reluctance Motors Based on Torque/Volume Using Finite Element Method & Sequential Unconstrained Minimization Technique", The 2008 International Magnetics (INTERMAG) Conference, May 4-8 2008.

(3)"The Evaluation of On-line Observer System of Synchronous Reluctance Motor Using a Coupled Transient FEM & Preisach Model", The 2008 International Magnetics (INTERMAG) Conference, May 4-8 2008.

(4)"Optimum Design Criteria for Maximum Torque Density and Minimum Torque Ripple of SynRM according to the Rated Wattage using Response Surface Methodology", The 2008 International Magnetics (INTERMAG) Conference, May 4-8 2008.

2007 USA Plorida Tampa

(1)"The Torque Ripple Reduction of A Concentrated winding SynRM according to A Stator &rotor structure variations using RSM", 52nd Annual Conference on Magnetism and Magnetic Materials, November5-9 2007.

2007 Germany Aachen

(1)"Determination of Paramenters of Motor Simulation Module Employed in ADVISOR", The 16th Biennial Conference on the Computation of Electromagnetic Fields(COMPUMAG), June 24-28 2007.

(2)"Permanent Magnet Demagnetization Characteristic Analysis of a Variable Flux Memory Motor Using Coupled Preisach Modeling and FEM", The 16th Biennial Conference on the Computation of Electromagnetic Fields(COMPUMAG), June 24-28 2007.

2007 Turkey Antalya

(1)"Optimum Lim Interval Selection of Vector Controlled Moving Secondary Plate Conveyor System Using Fem & Sumt", IEEE IEMDC 2007 International Electric Machines and Drives Conference, May3-5 2007.

(2)"Characteristics Analysis of Anisotropy Rotor SynRM Using a Coupled Fem & Preisach Model", IEEE IEMDC 2007 International Electric Machines and Drives Conference, May3-5 2007.

(3)"Functional Relation Derivation of Rotor Optimum Design Standard for SynRM Based on Torque/Volume Using Fem & Sumt", IEEE IEMDC 2007 International Electric Machines and Drives Conference, May3-5 2007.

(4)"Optimum Design Solutions To Minimize Torque Ripple of Concentrated Winding SynRM Using Response Surface Methodology", IEEE IEMDC 2007 International Electric Machines and Drives Conference, May3-5 2007.

(5)"Permanent Magnet Demagnetization Characteristics Analysis of a Variable Flux Memory Motor Using Coupled Preisach Modeling and FEM", IEEE IEMDC 2007 International Electric Machines and Drives Conference, May3-5 2007.

(6)"The Sensorless Vector Control Characteristics Analysis of Synchronous Reluctance Motor Using a Coupled FEM & Preisach Model", IEEE IEMDC 2007 International Electric Machines and Drives Conference, May3-5 2007.

2006 Greece

(1)"Sensorless Vector Control Parameters Estimation of Synchronous Reluctance Motor Using a Coupled FEM & Preisach Model", 17th International Conference on Electrical Machines ICEM 2006, September 2-5 2006.

(2)"Rotor Design on Torque Ripple Reduction for aSynchronous Reluctance Motor with Concentrated Winging using Response Surface Methodology", 17th International Conference on Electrical Machines ICEM 2006, September 2-5 2006.

(3)"Rotor Design functional standard of Synchronous Reluctance Motor according to torque/volume Using FEM & SUMT", 17th International Conference on Electrical Machines ICEM 2006, September 2-5 2006.

(4)"Dynamic Characteristics Analysis of 3D Conveyer System Linear Induction Motor for Control Algorithm Developments", 17th International Conference on Electrical Machines ICEM 2006, Greece, September 2-5 2006.

(5)"Anisotropy Rotor Design Synchronous Reluctance Motor Using a Coupled FEM & Preisach Model", 17th International Conference on Electrical Machines ICEM 2006, September 2-5 2006.

2006 USA Miami

(1)"Sensorless Vector Control Parameters Estimation of Synchronous Reluctance Motor Using a Coupled FEM & Preisach Model", The 12th Biennial IEEE Conference On Electromagnetic Field Computation IEEE CEFC 2006, April 30 - May 3 2006.

(2)"Rotor Design on Torque Ripple Reduction for a Synchronous Reluctance Motor with Concentrated Winging using Response Surface Methodology", The 12th Biennial IEEE Conference On Electromagnetic Field Computation IEEE CEFC 2006, April 30 - May 3 2006.

(3)"Rotor Design functional standard of Synchronous Reluctance Motor according to torque/volume Using FEM & SUMT", The 12th Biennial IEEE Conference On Electromagnetic Field Computation IEEE CEFC 2006, April 30 - May 3 2006.

(4)"Dynamic Characteristics Analysis of 3D Conveyer System Linear Induction Motor for Control Algorithm Developments", The 12th Biennial IEEE Conference On Electromagnetic Field Computation IEEE CEFC 2006, Miami, USA, April 30 - May 3 2006.

(5)"Anisotropy Rotor Design Synchronous Reluctance Motor Using a Coupled FEM & Preisach Model", The 12th Biennial IEEE Conference On Electromagnetic Field Computation IEEE CEFC 2006, April 30 - May 3 2006.

2005 USA Clalifonia San Jose

(1)"Optimum design criteria for Torque Ripple Reduction of a Synchronous Reluctance Motor Using a Coupled FEM & SUMT", Conference on Magnetism and Magnetic Materials, October 2005.

(2)"Optimal Design criteria of Synchronous Reluctance Motor with Concentrated Winding Using Response Surface Methodology", Conference on Magnetism and Magnetic Materials, USA, October 2005.

(3)"Demagnetization Characteristics Analysis of a Variable Flux Memory Motor Using Coupled Preisach Modeling & FEM", Conference on Magnetism and Magnetic Materials, USA, October 2005.

2005 Spain Vigo Baiona

(1)"Optium design on reduction of torque ripple for a Synchronous Reluctance Motor with concentrated winding using response surface methodology", ISEF, September 2005.

(2)"Efficiency Evaluation of PMASynRM Using Coupled FEM & Preisach Modeling", ISEF, September 2005.

(3)"Optium design criteria based on the rated watt of a Synchronous Reluctance Motor using a coupled FEM & SUMT", ISEF, September 2005.

2005 China Shenyang

(1)"Optimal Design of Synchronous Reluctance Motor by Loss and Efficiency Evaluation Related to Slot Number Using Response Surface Methodology", Conference on the Computation of Electromagnetic Field, June 2005.

(2)"Efficiency Evaluation of PMASynRM vs. SynRM Using Coupled FEM & Preisach Modeling", Conference on the Computation of Electromagnetic Field, June 2005.

(3)"Optimum design criteria based Rated Watt of Synchronous Reluctance Motor Using a Coupled FEM & SUMT", Conference on the Computation of Electromagnetic Field, June 2005.

2005 Japan Nagoya

(1)"Efficiency Evaluation of PMASynRM vs. SynRM Using Coupled FEM & Preisach Modeling", International Magnetics Conference, April 2005.

(2)"Optimum design criteria based Rated Watt of Synchronous Reluctance Motor Using a Coupled FEM & SUMT", International Magnetics Conference, April 2005.

(3)"Dynamic Characteristics Analysis in A Pole Changing Memory Motor Using Coupled FEM & Preisach Modeling", International Magnetics Conference, April 2005.

(4)"Permanent Magnet Demagnetization Characteristics Analysis of a Variable Flux Memory Motor Using Coupled Preisach Modeling and FEM", International Magnetics Conference, April 2005.

2004 Korea Jeju island

(1)"Re-Demagnetization Operation Characteristic Analysis of a Variable Flux Memory Motor Using Coupled Preisach Modeling and FEM", International Conference on Electrical Machines and System, October 2004.

(2)"Design Standard Computation Based on Capacity of Synchronous Reluctance Motor Using a Coupled FEM and Preisach Model" International Conference on Electrical Machines and System, October 2004.

(3)"Characteristic Analysis of Permanent Magnet Assisted Synchronous Reluctance Motor for High Power Application", International Conference on Electrical Machines and System, October 2004.

2004 france Grenoble

(1)"Re-Optimal Stator Design of Synchronous Reluctance Motors by Loss & Efficiency Evaluation Related to Slot Number using Response Surface Methodology", International Workshop on Optimization and Inverse Problems in Electrical Enginieering, September 2004.

(1)"Re-Optimal Design Criteria based on Capacity of Synchronous Reluctance Motor Using a Coupled FEM & Preisach Model", International Workshop on Optimization and Inverse Problems in Electrical Enginieering, September 2004.

2004 Korea Seoul

(1)"Dynamic Characteristic Analysis in a Pole Changing Memory Motor Using Coupled FEM and Preisach Modeling", Conference on Electromagnetic Field Computation, June 2004.

(2)"A Novel Stator Design of Synchronous Reluctance Motor by Loss & Efficiency Evaluations Related to Slot Numbers Using Coupled Preisach Model & FEM", Conference on Electromagnetic Field Computation, June 2004.

(3)"Design Standard Computation based on Capacity of Synchronous Reluctance Motor Using a Coupled FEM & Preisach Model", Conference on Electromagnetic Field Computation, June 2004.

(4)"Re-Demagnetization Characteristics Analysis of variable-flux Memory Motor Using Coupled Preisach Modeling and FEM", Conference on Electromagnetic Field Computation, June 2004.

(5)"Characteristic Analysis of Permanent Magnet Assisted Synchronous Reluctance Motor for high Power application", Conference on Electromagnetic Field Computation, June 2004.

2004 USA Anaheim

(1)"Re-Demagnetization Operation Characteristics Analysis of a Pole Changing Memory Motor Using Coupled Preisach Modeling and FEM", Conference on Electromagnetic Field Computation, June 2004.

2003 USA Saratoga

(1)"A Novel Stator Design of Synchronous Reluctance Motor by Loss & Torque Evaluations Related to Winding using Coupled Preisach Model & FEM", Recode of the 14th COMPUMAG Conference on the Computation of Electromagnetic Fields, July 13-17, 2003.

0

(2)"Loss Analysis and Efficiency Evaluations of Synchronous Reluctance Motor on the Basis of Speed Using Coupled FEM & Preisach Modeling ", Recode of the 14th COMPUMAG Conference on the Computation of Electromagnetic Fields, July 13-17, 2003.

2003 USA Boston,Massachusetts

(1)"Efficiency Evaluations of Synchronous Reluctance Motor Using Coupled FEM & Preisach Modelling", The 2003 IEEE International Magnetics Conference March 30-April 5, 2003.

(2)"A Study on Hysteresis of Line Start Permanent Magnet Motor Using Preisach Modeling", The 2003 IEEE International Magnetics Conference March 30-April 5, 2003.

2002 Italy Perugia

(1)"Rotor Design of A Synchronous Reluctance Motor to Minimize Torque Density & Power Factor", The 10th Biennial IEEE Conference on Electromagnetic Field Comutation, June 16-19, 2002.

(2)"Efficiency Evaluations of Synchronous Reluctance Motor Using Coupled FEM & Preisach Modelling", The 10th Biennial IEEE Conference on Electromagnetic Field Comutation, June 16-19, 2002.

2002 Netherlands Amsterdam

(1)"Analysis of Synchronous Reluctance Motor Using FEM Coupled Electromagnetic Field of Model & Thermal Field", The 2002 IEEE International Magnetics Conferene April 28-May 2, 2002.

(2)"Design Solutions to Minimize Iron Core Loss in Synchronous Reluctance Motor Using Preisach Model & FEM" The 2002 IEEE International Magnetics Conferene April 28-May 2, 2002.

Amsterdam, the Netherlands i

2001 Japan Nagano

(1)"Characteristic Analysis of PMLSM with Halbach Array for Short-Stroke Actuator" The Third International Symposium on Linear Drives for Industry Applications, Nagano, Japan, October 17-19, 2001.

2001 France Evian

(1)"The Characteristics Analysis of Eddy Current Brake System Using Halbach Array of Permanent Magnet", Recode of the 13th COMPUMAG Conference on the Computation of Electromagnetic Fields, July 2-5, 2001.

(2)"Design Criteria for Detent Force Reduction of PMLSM with Halbach Array", Recode of the 13th COMPUMAG Conference on the Computation of Electromagnetic Fields, July 2-5, 2001.

(3)"Design Criteria of A Synchronous Reluctance Motor to Maximize Torque Density & Power Factor", Recode of the 13th COMPUMAG Conference on the Computation of Electromagnetic Fields, July 2-5, 2001.

(4)"Development on the Analysis Method of Synchronous Reluctance Motor Using FEM Coupled Electomagnetic Field of Preisach Model & Thermal Field", Recode of the 13th COMPUMAG Conference on the Computation of Electromagnetic Fields, July 2-5, 2001.

(5)"The Time Domain Analysis of Salient Pole Rotor Type SRM" Recode of the 13th COMPUMAG Conference on the Computation of Electromagnetic Fields, July 2-5, 2001.

2000 Brazil Rio De Janeiro

(1)"A New Vector Control Algorithm of LIM and Prove by Coupled FEM with Control Algorithm", The 16th International Conference on Magnetically Levitated System and Linear Drives, June 2000.

2000 USA Milwaukee Wisconsin

(1)"Design Solution to Minimize Iron Core Loss in Synchronous Reluctance Motor", The 9th Biennial IEEE Conference on Electromagnetic Field Comutation, IEEE Magnetics Society, June 2000.

1999 Japan Sapporo

(1)"Hysteresis Characteristics Computation on PWM Fed Synchronous Reluctance Motor Coupled FEM & Preisach Modelling", Proceeding of the 12th Conference on the Computation of Electromagnetic Fields, COMPUMAG'99, October, 1999

(2)"Dynamic Characteristic Analysis of LIM Using Coupled Finite Element Method and Control Algorithm", Proceeding of the 12th Conference on the Computation of Electromagnetic Fields, COMPUMAG'99, October, 1999

1999 Italy Perusia

(1)"Hysteresis Modelling of Synchronous Reluctance Motor Considering PWM input Voltage", 2th International Symposium on Hysteresis Modelling and Micromagnetics, June, 1999

1999 USA Seattle, Washington

(1)"Vector Control Characteristics Analysis in Synchronous Reluctance Motor by Using Coupled FEM & Preisach Modelling and Experiments", IEEE International Electric Machines and Drives Conference, IEMDC'99, May, 1999

1998 USA St. Louis, Missouri

(1)"Iron Core Loss Minimization Scheme on Vector Control for Synchronous Reluctance Motor", IEEE-IAS Annual Meeting 1998, IEEE-Industry Application Society, 1998

(2)"Dynamic Characteristics Analysis of Vector Controlled LIM by Finite Element Method Experiment", IEEE-IAS Annual Meeting 1998, IEEE-Industry Application Society,1998

1998 USA Arizona

(1)"Hysteresis Analysis for Permanent Magnet Assisted Sychronous Reluctance Motor by Coupled FEM & Preisach Modelling", The Eighth Biennial IEEE Conference on Electromagnetic Field Comutation , IEEE Magnetics Society,1998 Tucson

(2)"Effect of Magnet on Ld and Lq Inductance of Permanent Magnet Assisted Synchronous Reluctance Motor", The Eighth Biennial IEEE Conference on Electromagnetic Field Comutation Tucson, IEEE Magnetics Society, 1998

1998 Korea Kyongju

(1)"Parameter Analaysis of permanent magnet assisted Synchronous Reluctance Motor by Coupled Preisach Modelling & Finite Element Method", The international Conference on Electrical Engineering, ICEE , 1998

1997 USA New Orleans, Louisiana

(1)"Iron Core Minimization and Compensation Scheme on Vector Control for Synchronous Reluctance Motor", 23rd International Conference on Industrial Electronics, Control, and Instrumentation IEEE Industrial, Electronics Society, 1997

1997 Brazil Rio De Janeiro

(1)"Analysis of Synchronous Reluctance Motor Using Finite Element Method Combined Preisach's Modeling", XI Coference on the Computation of Electromagnetic Fields, IEEE Magnetics Society, 1997

(2)"Vector Control Scheme of Synchronous Reluctance Motor Considering Iron Core Loss", XI Coference on the Computation of Electromagnetic Fields, IEEE Magnetics Society, 1997

(3)"Dynamic Characteristic Analysis of Synchronous Reluctance Motor Considering Saturation and Iron Loss by FEM", XI Coference on the Computation of Electromagnetic Fields, IEEE Magnetics Society, 1997

(4)"Dynamic Characteristic Analysis Using Coupled Magnetic & Thermal Finite Element Method in Linear Induction Motor", XI Coference on the Computation of Electromagnetic Fields, IEEE Magnetics Society, 1997

1997 China Beijing

(1)"Dynamic Characteristics Analysis for Permanent Magnet Assisted Synchronous Reluctance Motor by FEM", Proceeding of 15th International Conference on Magnet Technology, 1997

1997 Germany Braunschweig

(1)"Vector Control Simulation of Synchronous Reluctance Motor Including Iron Loss and Saturation Using FEM", International Symposium on Nonlinear Electro-magnetic Systems, ISEM, 1997

(2)"Control Parameter Calculation of Synchronous Reluctance Motor Using FEM and Preisach Modeling",International Symposium on Nonlinear Electro-magnetic Systems, ISEM, 1997

(3)"A Novel Vector Control Scheme for Synchronous Reluctance Motor Including Iron Loss and Saturation", International Symposium on Nonlinear Electro-magnetic Systems, ISEM, 1997

1996 China,Beijing

(1)"The Dynamic Characteristic Analysis Using Coupled Magnetic & Thermal FEM in Linear Induction Motor", The Asian Joint Seminar on Applied Electromagnetics, ASAEM, 1996

1995 UK Cardiff, Wales

(1)"Dynamic Analysis of Induction Motor with Tapped Stator Winding for Vector Control using FEM", International Symposium on Nonlinear Electro-magnetic Systems, ISEM, 1995

1995 Japan Ioujima, Nagasaki

(1)"Dynamic Characteristics Analysis or LIM's Vector Control Using FEM", The First International Symposium on Linear Drives for Inducstry Applications, LDIA'95, 1995